Technical Data, Pst 6100.Xxx L - Bosch PST 6000 Series Technical Information

PST 6100.XXX L
8-4
8.4

Technical data, PST 6100.XXX L

Type
Weld timer
I/O interface
Quality module
Degree of protection
Thyristor power unit ambient tem-
perature
Cooling
Temperature monitoring
Storage temperature
Corrosion
Humidity
Air pressure
Line voltage connection
grounded TN or TT system
Nominal system current;
max. continuous thermal current
Voltage supply;
Weld timer CPU;
I/O interface
Duty cycle (ED)
Clock frequency
Overvoltage protection
Electrical connection, mains supply
and transformer
Wire range
Basic switchgear cabinet loss
Weight
Mounting position
2-phase thyristor power unit, module de-
signed for recessed mounting
integrated
Slot for parallel, serial or fieldbus inter-
face
Slot prepared for retrofitting
IP 20; designed for modular enclosure or
for installation in switchgear cabinets
with IP 54
max. 55° C
air, max. 45° C
integrated
-25° C to +70° C
The ambient air must be free of acids,
caustic solutions, corrosive agents, salts
and metal vapors of any major con-
centration
Humidity class F as per DIN 40040;
20° C at 90% relative humidity;
40° C at 50% relative humidity (as per
VDE 0113);
Moisture condensation on the thyristor
power units must be prevented.
Any within a range of up to 2000 m
above sea level
400 V -20% to 600 V +10%;
50/60 Hz
130 A
24 V DC; min. 19 V DC up to max. 30 V
DC as per EN 61131-2, (external power
supply), or, alternatively, power supply
from the weld current system (internal
power supply)
max. 50% duty cycle permitted (regard-
less of possible power unit operating cur-
rents, limited by the built-in 2.2 kΩ de-ex-
citation resistor)
50/60 Hz
MOV; Metal Oxide Varistor
via box terminal; max. 50 mm
2
50 mm
70 W
approx. 12.5 kg
vertical or with its back on mounting
plate
1070 080 058-101 (2001.04) GB
2