Electrical Connection - Bosch PST 6000 Series Technical Information

1.7

Electrical connection

1070 080 058-101 (2001.04) GB
DANGEROUS ELECTRICAL VOLTAGE
The mains voltage is associated with many dangers!
Possible consequences of improper handling include death or most
severe injuries (personal injuries) and damage to property. For this
reason, the electrical connection must always be made by an electri-
cal expert in compliance with the valid safety regulations, the mains
voltage and the maximum current consumption of the individual
units of the equipment.
The mains voltage must match the nominal voltage given on the
nameplate of the product!
The equipment must be appropriately fused on the supply side!
Prior to connecting a thyristor power unit, the following must be
strictly observed:
D Power OFF.
D Provide a safeguard to prevent unintentional reclosing.
D Verify that the system is safely isolated from supply and
de-energized.
D Connect to earth and short circuit.
D Cover up or safeguard all live parts.
DANGEROUS ELECTRICAL VOLTAGE
Handling live parts at mains voltage may result in death, severe
bodily injury or considerable damage to property unless appropriate
precautions are taken.
For this reason, the electrical connection must always be made by
an electrical expert in compliance with the valid safety regulations,
the mains voltage and the maximum current consumption of the indi-
vidual units of the equipment.
Incorrect mains voltage may render the system dangerous or cause
electrical component failure!
Therefore, please ensure the following:
D The mains voltage must match the nominal voltage given on the
nameplate of the product!
D Mains voltage fluctuation or variation from the nominal voltage
must be within the specified tolerance range (see Technical Data).
D The equipment must be appropriately fused on the mains side!
D Proper and well insulated tools must be used for handling electric
connections!
Safety instructions
1-9