Setting The Water Softener - Miele G 7881 Operating Instructions Manual

Setting the water softener

^ Turn off the machine with the "On/Off"
button.
^ Turn the program selector to the
"Stop" f position.
^ Press and hold the "Start" 6 and
"Display" ß buttons at the same
time. Turn the machine on with the
"On/Off" button.
The current program status "P..." will
appear in the display and the
"Fill/Drain" indicator will illuminate.
^ Press the "Drying" 0 button once.
"E01" (programming level 1) will
appear in the display.
^ Turn the program selector one switch
position clockwise (1 o'clock
position).
The number "19" will appear in the
display (this indicates the factory
water hardness setting in gr/gal,
equivalent to 340 ppm).
^ Press the "Display" ß button as
many times as necessary, or hold it in
until the required value (hardness
level in gr/gal) appears in the display.
Once the number "60" has been
reached, the counter will begin again
at "0".
^ Press the "Start" 6 button. "SP" will
appear in the display.
^ Press the "Start" 6 button again.
The setting will now be stored in
memory. The display will go out.
For future servicing, it is useful to make
a note of your water hardness level.
^ Enter your water hardness level here:
or
Water softener
gr/gal
ppm
17