Step 2: Checking The Accessories - Sony HES-V1000 Operating Instructions Manual

Home entertainment server
Hide thumbs Also See for HES-V1000:
Table of Contents

Advertisement

D Holding the glass panel to the side, push the
lever back to its original position.
The panel is locked.
Push the lever inside
Push the lever all the way through till it remains flush
the back panel surface.
E Repeat steps 1 to 4 to attach the other panel.
Use the supplied cleaning cloth to wipe the glass
surfaces. The cleaning cloth is included in the
accessory pack.
Note
If the unit is brought director from a cold to a warm location, or is placed
in a very damp room, moisture may condense on the unit. If this happens,
leave the unit without connecting the power cord for about six hours,
until the moisture evaporates.
Observe the following precautions when
moving the unit.
• Be sure to remove all discs before turning off the power.
• Attach the two lock screws and the lock stick to the unit.
Be sure to disconnect the power cord when attaching them.
Use the supplied carton and cushions for transportation.
22
1
2
Lever not engaged, panel not
firmly locked
Step 2: Checking the
Accessories
The following items are supplied in the accessory pack:
• Audio/video cable (phono plug × 3) (1)
• LAN cable with Ferrite Clamp (Ferrite EMC Filter) (1)
• HDMI cable (1)
• Power cord (1)
®
• Remote commander
(remote control) (1)
• Size AA (R6) batteries (2)
• Cleaning cloth (1)
• Dust-tight seals (6)
• "Music Transfer" installation CD (1)

Advertisement

Table of Contents
loading

Table of Contents