Connecting With An Hdmi Cable - Sony HES-V1000 Operating Instructions Manual

Connecting with an HDMI cable

Superior video and audio quality can be obtained when the
HDMI cable is used to connect the server to a TV. This
connection type outputs both the audio and video signals so only
one cable is required.
TV
To switch the output resolution for the HDMI
OUT jack
Select [Settings] – [Video Settings] – [Output Resolution
Priority] – [HDMI] (page 112).
◆Notes about the HDMI OUT jack
• When you connect the server to an AV amplifier (receiver)
using an HDMI cable, you will need to do one of the following:
– Connect the AV amplifier(receiver) to a TV with the HDMI
cable.
– Connect the server to the TV with a video cable other than the
HDMI cable (component video cable, S VIDEO cable, or video
cable).
• When connecting to the HDMI OUT jack, carefully align the
HDMI connector with the jack. Do not bend or apply pressure
to the HDMI cable.
102
To HDMI input jack
HDMI IN
HDMI cable (supplied)
HDMI OUT
To HDMI OUT
Hint
z
Connection to DVI devices is not guaranteed.
Notes
• Pictures and sound may be interrupted before the devices recognize the
connection.
• If you connect a component that does not conform to the selected audio
signal, a loud noise (or no sound) will come out from the speakers,
which could damage your ears or speakers.
Server
PUSH/OPEN
CONTROL S IN/ HDMI OUT
IR IN
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
LAN(10/100)
LINE
S VIDEO
OPTICAL COAXIAL
R-AUDIO-L VIDEO
AUDIO OUT COMPONENT VIDEO OUT IN 1
R L Y P P
B R
OUT
AC IN