Getting Started
Follow steps 1 to 8 to hook up and adjust the
settings of the server.
For jack and button names, see "Index to
Parts and Controls" (page 12).
Notes
• Plug cables securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to
be connected.
• A TV with a video input jack is required to connect to this
server.
• Be sure to disconnect the power cord of each component
before connecting.
• To avoid electrical damage to the server and the external
devices, do not apply too much pressure on the connecting
cables.
18
Step-by-step Instructions
Unpacking (page 19)
Step 1
Checking the Accessories (page 22)
Step 2
Installing Tip-Over Prevention
Step 3
(page 23)
Connecting to the TV (page 23)
Step 4
Connecting to the Network (page 26)
Step 5
Connecting the Power Cord (page 27)
Step 6
Connect the power cord last to protect the internal HDD.
Preparing the Remote (page 27)
Step 7
Making the Initial Settings (page 28)
Step 8