Mail - D-Link DCS-5030L User Manual

Section 3 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure
what settings to use, check with your e-mail service provider.
This is the domain name or IP address of your external e-mail
SMTP Server
server.
Address:
This allows you to set the port for the SMTP Server. The default
SMTP Server
value is 25, and should only be changed if advised by your
Port:
e-mail provider.
This is the e-mail address listed as the sender for your notification
Sender e-mail
e-mails.
Address:
This is the e-mail address that your notification e-mails will be
Receiver
sent to.
e-mail
Address:
If the SMTP server uses authentication, enter your user name.
User Name:
If the SMTP server uses authentication, enter your password.
Password:
For example, if you want to use Gmail with SSL-TLS for e-mail
notifications, you can follow the setup procedure as below:
Step 1 - Enter "smtp.gmail.com" in SMTP Server Address.
Step 2 - Change the SMTP server port number from 25 to
465.
Step 3 - Enter your gmail e-mail address in Sender E-mail
Address.
Step 4 - Enter the destination e-mail address in Receiver
E-mail Address.
Step 5 - Enter the user name required to access the SMTP
server.
Step 6 - Enter the password required to access the SMTP
server.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click the Test button to send a test e-mail to the
account listed above.
D-Link DCS-5030L User Manual

Mail

41 41