Configuration; Using The Web Configuration Interface - D-Link DCS-5030L User Manual

Hd pan & tilt wi-fi day/night camera
Hide thumbs Also See for DCS-5030L:
Table of Contents

Advertisement

Section 3 - Configuration

Using the Web Configuration Interface

After completing setup through the mydlink Lite mobile app or Zero Configuration Setup, you are ready to use your camera.
The camera's built-in web configuration interface is designed to allow you to easily access and configure your DCS-5030L. There
are two ways in which you can access your camera's web configuration interface:
• Log in to your mydlink account to access your camera's configuration interface.
• You can also access the interface locally by entering the IP address of your camera into a web browser, such as Internet
Explorer
®
. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create
a password, leave the password field blank. After entering your password, click OK.
Note: If you are directly connecting your camera to your PC, or if you are using the camera on a closed network, the default IP
is 192.168.0.20. If the camera is connected to a router or network, a different IP address may have been assigned.
D-Link DCS-5030L User Manual

Configuration

DCS-5030L
24
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents