Section 3 - Configuration
This section allows you to configure the image settings for your camera.
If you have lights flickering in your camera video, try enabling
Enable
antiflicker. Otherwise, you should leave this disabled.
Antiflicker:
Select this box to vertically flip the video.
Flip Image:
Horizontally flip the video.
Mirror:
Note: If the camera is installed upside down, Flip Image and
Mirror should both be checked
Allows you to adjust the brightness level. Select a setting
Brightness
between -5 and +5.
Control:
Allows you to adjust the contrast level. Select a setting between
Contrast
-5 and +5.
Control:
Allows you to adjust the saturation level. Select a setting
Saturation
between -5 and +5.
Control:
D-Link DCS-5030L User Manual
Image Setup
36
36