Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual page 26

Audio Cord Connection Type
B-2
D
qa Press ENTER.
DTS is selected.
qs Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 23 (
through
Audio Cord Connection Type
B-2
A D
qd Press ENTER.
Quick Setup is finished. All connections and setup operations are complete.
Note
You can directly start Quick Setup only when you run it for the first time.
To run Quick Setup a second time, select "QUICK" under SETUP in the Control Menu (page 54).
Enjoying the surround sound effects
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in page 21 to 23
( through
B
you first connect the player. Refer to page 56 for using the Setup Display.
26
C-2
AUDIO SETUP
).
A D
C-2
). Each of these are the default settings and do not need to be adjusted when
A D
You select
D-PCM
DOLBY DIGITAL (only if the
amplifier/receiver has a Dolby
Digital decoder)
AUDIO ATT:
AUDIO DRC:
DOWNMIX: DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
You select
OFF
ON (only if the amplifier/receiver
has a DTS decoder)
OFF
STANDARD
ON
D-PCM
OFF
OFF
ON
Page
59
59
B
Page
59
59