Step 3: Connecting The Power Cord; Step 4: Quick Setup - Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual

Step 3: Connecting the Power Cord

Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the "switched" power socket of an amplifier
(receiver). Otherwise, when you turn off the power of your amplifier (receiver), the settings for
the player may be lost.

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments to use the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
A Turn on the TV.
B Switch the input selector on the TV to the player.
C Press POWER on the player and press [/1 on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this
message does not appear, select "QUICK" under SETUP in the Control Menu (page 13) to
run Quick Setup.
D Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
24
POWER
LANGUAGE SETUP
OSD:
DVD MENU:
AUDIO:
SUBTITLE:
ENTER
./> X/x
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
[/1 I/1
./>
X/x
ENTER