Sony DVP-NS300 Operating Instructions (CD/DVD Component) Operating Instructions Manual page 23

Connecting to an AV amplifier (receiver) with a digital input jack having a
D
Dolby Digital, or DTS decoder, and 6 speakers
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver)
Dolby Digital (5.1ch) (page 64)
DTS (5.1ch) (page 64)
z
To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL"(page 24).
If your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 28). Otherwise, no sound or a loud
noise will come from the speakers.
CD/DVD player
DIGITAL OUT LINE OUT
PCM/DTS/
DOLBY DIGITAL R-AUDIO 1-L
COAXIAL OPTICAL
R-AUDIO 2-L
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL
Rear
(R)
[Speakers]
Rear
Subwoofer
(L)
l: Signal flow
S VIDEO COMPONENT
VIDEO OUT
OUT
Y
VIDEO 1
P
B
P
R
VIDEO 2
D
OPTICAL
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to optical digital input
AV amplifier (receiver) with a decoder
Coaxial digital cord
(not supplied)
to coaxial digital input
Front (L)
Front
(R)
[Speakers]
Center
23