D-Link Air DWL-900AP User Manual page 31

SNMP Utility Menus (continued)
IP Config
Use this menu to view, set or change IP settings. You can set them manually
or allow a DHCP server to assign IP settings.
Listed in the Bridging Level information field are the following:
MAC Address
A unique 48-bit, hard-coded Media Access Control address used to identify
devices on the WLAN and Ethernet LAN.
IP Settings
You may change any of the IP settings by simply typing in the desired
address or net mask. Click Apply to put the changes into effect. Remember
that if you change the IP address of the device to an address that is outside
the subnet of the computer you are using, you will lose access to the SNMP
Utility.