Snmp Management Utility - D-Link Air DWL-900AP User Manual

SNMP Management Utility

SNMP (Simple Network Management Protocol) is a network monitoring and
control protocol. Once you have installed the Wireless Access Point SNMP
Utility and assigned an IP Address through the USB Configuration Utility
(see the Quick Install Guide,) you can configure the remaining settings to suit
the needs of your network. The USB Configuration Utility contains the
same menu options as the SNMP Utility, however, you will need to connect
your computer to the DWL-900AP via USB cable each time you manage your
network with the USB Configuration Utility. Using the SNMP Management
Utility, you can configure your network on any networked computer without
using the USB connection. The settings menus are described in this section.
Accessing the SNMP Manager
Follow these steps to access the Wireless Access Point manager from the
manager PC:
From the Start menu, Start > Programs > Wireless AP >
Wireless AP SNMP Utility
A new screen, the Wireless Access Point Searching Utility, will appear. If
the device does not appear listed in the screen, click the Search button. The
Search button is the magnifying glass icon.
Click the
Search button
to locate the
device