Content Filtering
DFL-1100 HTTP content filtering can be configured to scan all HTTP content protocol
streams for URLs or for Web page content. If a requested URL is on the URL block list,
the DFL-1100 will block that Web page.
You can configure URL blacklist to block all or just some of the pages on a website. Using
this feature you can deny access to parts of a web site without denying access to it
completely.
The HTTP content filtering can also be configured to strip contents like ActiveX, Flash and
cookies.
There is also a URL whitelist for URLs that should be excluded from all Content Filtering.
Note: For HTTP URL filtering to work, all HTTP traffic needs to go through a policy using a
service with the HTTP ALG.
Edit the URL Global Whitelist
Follow these steps
to add or remove a
URL.
Step 1. Go to
Firewall and
Content
Filtering and
choose Edit
global URL
whitelist.
Step 2.
Add/edit or
remove the
URL that
should never
be checked
with the
Content
Filtering.
Click the Apply
button below to
apply the
change or click
Cancel to
discard
changes.