VLAN
Click on System in the menu bar, and then click VLAN below it, this will give a list of all
configured VLANs, it will look something like this:
Add a new VLAN
Follow these steps to add a new VLAN.
Step 1. Go to System and VLAN.
Step 2. Click on Add new in the bottom of the routing table.
Step 3. Choose the interface for the VLAN from the dropdown menu.
Step 4. Specify the 801.2Q VLAN ID.
Step 5. Fill in the IP address of the VLAN interface. This is the address that will be used to
ping the firewall, remotely control it and be used as a gateway for hosts on the VLAN.
Step 6. Choose the correct subnet mask of this interface from the dropdown menu.
Click Apply to apply the setting, or click Cancel to discard the changes.
Remove a VLAN
Follow these steps to add or remove a VLAN.
Step 1. Go to System and VLAN.
Step 2. Click Edit next to the VLAN you would like to remove.
Step 3. Select Delete this VLAN.
Click Apply to apply the setting, or click Cancel to discard the changes.
20