Connecting A Vcr; Connecting A Camcorder - Samsung SPN4235 Owner's Instructions Manual

Connecting a VCR

Connecting a VCR to the Video or S-Video/Audio jack
PDP
Power Plug
Ferrite Cores
(3301-001110)
How to Connect
Connect the Video/Audio cables between the AUDIO(L/R)/VIDEO jacks on the PDP and
AUDIO/VIDEO OUT jacks on the VCR. (Note: For better video, you can use an S-Video cable.)
Videotape Playback:
1. Turn on your PDP, and press the SOURCE button on the remote control.
2. Move the joystick up or down to select "Video" or "S-Video", then press the joystick to enter.
3. Turn on your VCR, insert a videotape and press the play button.
Ferrite Cores
(3301-001110)
The ferrite cores are used to attenuate undesired signals. When connecting audio cable (PC, DVI,
S-Video, Video) , attach one of these ferrite cores to the cable near the connector.
When you connect the audio cable (PC, DVI, S-Video, Video) to the
connectors, first bind round the ferrite core to secure it.
24
VCR
Audio Cable
S-Video Cable
Video Cable

Connecting a Camcorder

Viewing camcorder tapes
PDP
Power Plug
Ferrite Cores
(3301-001110)
How to Connect
Connect a Video/Audio cable between the AUDIO(L/R)/VIDEO jacks on the PDP and the
VIDEO/AUDIO OUTPUT jacks on the camcorder.
Viewing Tapes
1. Turn on your PDP, and press the SOURCE button on the remote control.
2. Move the joystick up or down to select the "Video", then press the joystick to enter.
3. Turn on your camcorder and set it to Video Mode. (For details, refer to your camcorder
owner's instructions.)
4. Set the IN/OUT switch on your camcorder to OUT.
5. Insert the tape into the camcorder and press the Play button.
Camcorder
Video Cable
Audio Cable
25