Panasonic WJ-HDE300 Conversion Manual page 6

WJ-HDE300 S-ATA conversion guide
(12) Remove three screws fixing the power distribution board, and remove the power distribution board.
Disconnect five connectors from the power distribution board.
(13) Remove one hexagonal spacer (30 mm) from the main board.
CN100
CN103
CN102
(14) Remove four screws each fixing the HDD mounting chas-
sis, and remove two HDD mounting chassis.
(15) Disconnect the ATA cables from the main board.
(16) Remove two angle fixing screws from the removed power
distribution board, and insert the insulating plate, and fix it
with the two screws.
Panasonic System Solutions
Power distribution board
Hexagonal spacer
CN104
CN105
Power distribution board
Angle fixing screws
5
Maintenance guide
HDD mounting chassis
ATA cables
Insulating plate
HDE300_SATAConversionGuide_B