Panasonic WJ-HDE300 Conversion Manual page 12

WJ-HDE300 S-ATA conversion guide
(36) Connect the connector to the front panel and fix the front panel with two screws in the reverse order of the removal.
(37) Attach the S-ATA label, large (for top) to the top panel.
Attach the S-ATA label, small (for front) to the front
panel.
Note:
The new HDDs need to be formatted before operation. Refer to the Operating Instructions for detail.
+++++++++++++++++++++++++++++++++++++
Panasonic System Solutions
SATA label(for top)
ERROR
HDD
POWER
OPERATE
End of the document
+++++++++++++++++++++++++++++++++
11
Maintenance guide
7-10mm
SATA label(for front)
HDD 1 HDD 2 HDD 3 HDD 4
HDE300_SATAConversionGuide_B
Approx. 2mm
S-ATA
Extension Unit
WJ-HDE