Standards; Used Standards; Ce Marking; Declaration Of Conformity - Bosch Rexroth IndraControl VSP 3 Series Instructions Manual

Bosch Rexroth AG

Standards

8 Standards
8.1

Used Standards

Standard
EN 60 204-1
EN 60 61000-6-4
EN 60 61000-6-2
EN 61558-2-6
EN 60664-1
EN 61 131-2
EN 61 131-2
EN 60950
ISO 13850
EN 60 529
EN 60 068-2-6
EN 60068-2-27
EN 60721-3-3
EN 60721-3-2
EN 60721-3-1
UL 508
Fig.8-1: Used standards
8.2

CE Marking

8.2.1

Declaration of Conformity

The electronic products described in this project planning manual comply with the re‐
quirements and goals of the following EU directives and with the harmonized European
standards:
EMC Directive 2004/108/EC
The electronic products described in this project planning manual are intended for the
use in industrial environments and comply with the following requirements:
16/43
Rexroth IndraControl VSP xx.3 Panel PC
Description
Electrical equipment of machines
Generic standards - emission standard (industrial environ‐
ments)
Generic standards – noise immunity (industrial environ‐
ments)
Transformer for 24 V power supply unit, protective separa‐
tion
Overvoltage category II
24 V outputs requirements
24 V current supply requirements
Clearances and creepage distances office (environment)
and power units
Safety of machinery, emergency stop devices
Degrees of protection (including housings and installation
compartments)
Vibration test
Shock test
Classification of ambient conditions
Classification of ambient conditions
Classification of ambient conditions
Industrial Control Equipment
DOK-SUPPL*-VSP*XX.3***-IT01-EN-P