Electrical Wiring; Connecting The Panel Pc To The Voltage Supply - Bosch Rexroth IndraControl VSP 3 Series Instructions Manual

Bosch Rexroth AG
Mounting, Dismounting and Electrical Installation
10.4

Electrical Wiring

10.4.1

Connecting the Panel PC to the Voltage Supply

Connection scheme
Panel PC
Fig.10-4: Connecting the operator display to the voltage supply
Connection
1. Connect the functional earth ground.
2. Connect "X10" for the 24 V voltage supply to the industrial power unit.
NOTICE
Ensure the correct polarity at the X10 connector and the correct dimensioning of the
fuse.
NOTICE
Connect the functional earth ground.
Use a 24 V industrial power supply unit acc. to DIN EN 60742, classification VDE 0551,
for example "VAP01.1H-W23-024-010-NN" (parts number R911171065) for the voltage
supply.
26/43
X10
24V voltage supply
-
+
Damage to the control cabinet PC (fire hazard)
caused by polarity reversal of the X10 connection
without additional external protection.
Material damages to electronics due to missing
functional earth ground connection!
DOK-SUPPL*-VSP*XX.3***-IT01-EN-P
Rexroth IndraControl VSP xx.3 Panel PC
Potential-free
industrial power supply unit
acc. to DIN EN 60742,
classification VDE 0551