Chassis and Power Supplies
Monitoring Chassis Components
Viewing Chassis Slot Information
To view basic slot information, enter the show module command at the CLI prompt:
-> show module
To view more detailed information, use the show module long command:
-> show module long
Monitoring Chassis Temperature
The operating temperature of your switch is a critical factor in its overall operability. In order to avoid a
temperature-related system failure, your switch must always run at a temperature within the specified
operating temperature range.
To avoid chassis over-temperature conditions, follow the important chassis airflow recommendations on
page
3-22.
To check the switch's current temperature status, use the
-> show temperature
Chassis/Device | Current |
---------------+---------+---------+--------+--------+-----------------
1/CMMA
1/Slot1
2/CMMA
2/Slot1
For more information about this command, see the "Chassis Management and Monitoring Commands"
chapter in the OmniSwitch CLI Reference Guide.
OmniSwitch 6360 Hardware Users Guide
Range
| Danger | Thresh |
54
15-93
54
15-93
39
15-85
39
15-85
April 2021
show temperature
Status
93
96
UNDER THRESHOLD
93
101
UNDER THRESHOLD
85
88
UNDER THRESHOLD
85
101
UNDER THRESHOLD
Monitoring Chassis Components
command. For example:
page 3-31