Huawei Eudemon8000E Series Manual page 107

HUAWEI Eudemon8000E Firewall
Hardware Description
Table 5-14 Interface attributes of the 2-port 10GBase LAN/WAN-XFP FPIC
Attributes
Connector type
Optical
interface
attributes
Frame format
Network
protocol
Table 5-15 Attributes of 10G XFP optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Minimum
transmitting
power
Maximum
transmitting
power
Receiving
sensitivity
Overload
optical power
Optical fiber
type
The 10G XFP multi-mode optical module supports two types of multi-mode optical fibers with
different cores.
the transmission distance. During configuration, the length of optical fibers is restricted by the
transmission distance. In addition, the optical fiber with the 50-um core and 2000-MHz*km
modal/bandwidth is a special type, which is not delivered by Huawei. If this type of optical fiber
is required, you need to purchase it additionally.
Issue 01 (2012-11-07)
Description
LC/PC
Compliant with the selected XFP optical module.(for the attributes of XFP
modules, see Table
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km 10 km
850 nm 1310 nm
-7.3 dBm -6.0 dBm
-1.3 dBm -1.0 dBm
-7.5 dBm -11.0 dBm
-1.0 dBm 0.5 dBm
Multi-mode Single-mode
Table 5-16 shows the relationship between the core, the modal/bandwidth, and
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-15)
40 km
1550 nm
-1.0 dBm
2.0 dBm
-15.0 dBm
-1.0 dBm
Single-mode
5 Boards
80 km
1550 nm
0 dBm
4.0 dBm
-24.0 dBm
-7.0 dBm
Single-mode
97