Canon EOS 1D Software Instruction Manual page 66

Personal Function Settings
[Other functions 1]
Changes the timer's time length (W-71)
Illuminates the LCD panel during bulb exposures (W-72)
[Other functions 2]
Sets the default settings when the CLEAR button is ON (W-72)
[Other functions 3]
Shortened release time lag (W-72)
Enables the electronic dial's function to be used in the reverse direction (W-73)
Prevents exposure compensation with the Quick Control Dial (W-73)
Enables Quick Control Dial switch to turn on/off Main Dial too (W-73)
Add original decision data (W-74)
[Combination]
Allows you to check the settings (W-75)
Allows you to save the settings (W-76)
Allows you to load the saved settings (W-76)
* Omission of P.Fn-11, 12, 13, 22 and 29
To match the numbers and descriptions for the Personal Functions to the EOS-1 series, some
numbers have been omitted.
4
Set up the Personal Function
If you select the checkbox, the selected item takes effect.
Checkbox
If you enter a numerical value, values outside the valid range of settings are ignored.
Clicking the [Load settings] button acquires the settings with the Personal Function
settings on the camera.
Clicking the [Reset] button removes all the check marks from the windows.
If the Personal Function settings are saved on your computer, the saved settings can
be loaded (W-76).
W-60
.
(W-62 to W-74)