Basic Settings
You can specify the owner's name and date/time in the camera, and check the properties of
a memory card (CF card, SD card) in the camera.
1
Display the [Camera settings] dialog box
2
Select the [Basic settings] tab.
The [Basic settings] tab sheet
appears.
3
Specify the basic settings.
Enter the name of a
camera owner. You can
enter up to 31 characters.
Enter a value or click the
[ ]/[ ] buttons to specify
the date and time.
The battery level of the
camera is indicated by
[
] or [
]. When
you are using the DC
Coupler Kit, [
] is
displayed.
4
Click the [OK] button.
The settings are applied and the [Camera settings] dialog box closes.
Applies the settings that
you have specified in the
[Basic settings] tab sheet
to the camera.
Restores the parameters to their
original ones and closes the [Camera
settings] dialog box.
.
(M-56)
This box shows the
camera model, body ID
(serial number) and
firmware version.
Imports the date and time
from your computer.
This box shows whether a
memory card is loaded in
the camera along with the
available space on the
card and its total capacity.
Applies the settings that you have specified
in all the tab sheets to the camera and
closes the [Camera settings] dialog box.
M
4
M-57