Canon EOS 1D Software Instruction Manual page 132

Connecting the Camera to Your Computer
Before downloading images to your computer or specifying the camera settings, you must
connect the camera to your computer with the dedicated FireWire (IEEE1394) cable.
You can connect the camera while your computer is running.
1
Plug the dedicated cable into the computer.
Plug the cable into the FireWire
(IEEE1394) port.
Refer to the computer User's
Manual for information on the
terminal areas.
2
Plug the dedicated cable into your camera.
Open the cover and plug the cable
into the <
3
Set the camera's power switch to <ON>.
The camera is now ready to
communicate with your computer.
Proceed to Chapter 3
continuously.
M-8
> terminal.