Bosch Rexroth IndraControl XFE01.1-SY-01 Operating Instructions Manual page 42

36/45
Maintenance
NOTICE
Do not use any solvents (e. g. diluents) for cleaning!
●
Maintenance notes
The Safety extension module IndraControl XFE01.1-SY-01 runs without
maintenance. Check the Safety extension module IndraControl XFE01.1-SY-01 at
least annually. The check includes:
Correct position of the extension module
●
Correct position of all plug connections and terminal connection
●
Damage or rupture
●
Replace the extension card IndraControl XFE01.1-SY-01 immediately if damaged.
In case of damages, please contact the Bosch Rexroth Service.
Replacing memory card
NOTICE
Only qualified service personnel is allowed to exchange the memory card.
For the position of the memory card, refer to
IndraControl XFE01.1-SY-01" on page
To replace the memory card, proceed as follows:
1. Disconnect the complete system from voltage. This includes the
IndraControl XMxx control. The Safety extension module IndraControl
XFE01.1-SY-01 is connected to this control.
2. Secure the system against restart.
3. Press the microSD card down into the microSD slot down until the
microSD card disengages.
4. Remove the microSD card from the slot.
5. Insert the new microSD card into the slot with the labeling up.
6. Press the microSD card down into the slot down until the microSD card
engages.
7. Check whether the microSD card correctly engaged into the slot.
8. Commission the system again.
Bosch Rexroth AG R911376654_Edition 03
IndraControl XFE01.1-SY-01 Safety Ex-
The front panel is dissolved by solvents!
Unintended exchange of the memory card can
damage the Safety
IndraControl XFE01.1-SY-01
fig. 12-1 "Safety extension module
31.
tension Module
extension module