Table of Contents
Advertisement
DOK-SUPPL*-VAU*01.1U**-PR03-EN-P
Rexroth IndraControl VAU 01.1U UPS with USB interface
Glossary VAU 01.1U
Shutdown Delay Time (= Control time)
The "Shutdwon Delay Time" is the time which the shutdown of the connected
PC is delayed, which is set in the UPS-NT software. The user can backup the
data during this time.
Time delay (= timer, time delay function, time delay circuit, delay time)
This time delay prevents that UPS operation is signaled to the connected PC
and initiated during the first 120 seconds after switching on if the input volt‐
age is switched off within these 120 seconds.
UPS (= uninterruptible power supply)
The UPS is used for timely-limited voltage supply of the connected device if
the voltage supply (DC 24 V) fails.
UPS-NT Control software
The UPS-NT control software is used to monitor and control the UPS.
UPS operation (= buffer operation, buffer mode)
Signal to the connected PC that the UPS is in the buffer mode and that the
supply voltage "24V Out" switches off after a set time.
UPS time (= buffer time)
The UPS time is the time period in which the connected device is provided
with output voltage of the VAU – after switching off of the input voltage.
Bosch Rexroth AG
59/63
Glossary VAU 01.1U
Advertisement
Table of Contents
