Toshiba B-852 Series Supply Loading Instructions page 9

7. Repeat steps 4 through 6 with the Ribbon Take up Roll, locking it in place also.
8. Take up any slack in the ribbon by rotating the green Core Winding Gear on the take up in the direction of
arrow .
9. Close the Print Head Block and lock it in place by pressing at locations
NOTE:
Be sure to remove any slack in the ribbon. Printing with a wrinkled ribbon will lower the print quality
< For EU Only >
TOSHIBA TEC Europe Retail Information Systems S.A.
Rue de la Célidée 33 BE-1080 Brussels
and
9
in the figure below.
Green Ribbon
Winding Core
Copyright © 2011
by TOSHIBA TEC CORPORATION
All Rights Reserved
570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN
PRINTED IN INDONESIA
E
EO2-33019B
SPTM-0237