Section 3 - Configuration
Link Test
The DAP-3712 has a built-in Iperf function. Users can configure the DAP-3712 in Iperf Server Mode. Then the Iperf client can connect to the Iperf
server to verify the speed between the two links. In client mode, you can assign an Iperf server IP address to check the speed between the two links.
Iperf Type:
Select Client or Server
Iperf Dual:
If you select Iperf Dual, the DAP-3712 will conduct
a bi-directional speed test. Otherwise, it only test
the speed of transmission from the Iperf client to
the Iperf server.
Iperf Server:
Enter the Iperf server's IP address.
Iperf Thread:
Enter the number of threads during the test.
Iperf Time:
Enter how long the speed test should last.
Iperf Interval:
Enter the interval to wait between the tests.
D-Link DAP-3712 User Manual
46