Optional) Replacing A Pad - Huawei FusionDC1000A Maintenance Manual

FusionDC1000A Prefabricated All-in-One Data
Center
Maintenance Guide (IT Scenario)
Procedure
Step 1 Remove the old WiFi module from the USB port on the ECC800-Pro.
Step 2 Install the spare WiFi module in the original position.
Step 3 Log in to the ECC800-Pro WebUI.
Figure 4-64 Position of the WiFi module
----End

4.3.12 (Optional) Replacing a PAD

Prerequisites
A spare PAD of the same model is available and functional.
Impact on the System
None
Preparations
Tools: ESD wrist strap, ESD gloves, label, marker
Material: new PAD of the same model
Skill requirement: ELV engineer
Procedure
Step 1 Install the app on the spare PAD and connect the PAD to the network over the
WiFi hotspot of the data center.
Step 2 Specify the user name and password for the app on the spare PAD and log in to
check that the app works properly.
Step 3 Remove the old PAD from the support and install the spare PAD on the support.
----End
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd.
4 Parts Replacement
119