1 Important Safety and Handling Instructions
Handling
Do not get the product wet. Do not insert foreign
objects or liquids into the product.
Do not expose the product to strong shocks or
vibration.
Maintenance and inspection
Unplug the power cable from the power outlet
before cleaning it using a dry cloth. Cleaning the
power cable when the product is turned on or using
a wet cloth may cause electric shock.
CAUTION
Denotes the risk of injury.
Transportation/Installation
Do not install the product on an unstable surface or
in locations exposed to severe vibration. This may
cause the product to topple over or fall down,
resulting in injury.
Do not install the product in locations directly
exposed to salt water or where corrosive gases or
oily smoke are present. Contact with such
substances may corrode and degrade the
mountings, causing the product to fall down and
cause injury.
Handling Precautions
Do not install the product in a location exposed to
high temperatures. This may cause malfunctions.
Do not use organic solvents such as alcohol,
benzene or paint thinner to clean the product.
Do not disassemble or modify the product.
・ There are exposed electrodes inside the product.
Contact with such parts may cause injury or electric
shock.
・ Foreign objects or dust entering into the product may
cause malfunctions.
・ In surroundings exposed to high temperatures and
humidity, humid air entering inside the product may
cause malfunctions and condensation.
Handling
Inspect mountings regularly (every six months to
one year) to ensure they are securely tightened.
Beware of freezing conditions. The product does
not have a freeze-proof structure so take
precautions when installing it in locations that may
freeze. The product may not operate correctly if
frozen.
5
Handling Precautions