Selecting The Lens Used; Switching To Underslung Mode; Setting The Camera Head's Motion Range - Canon CR-G100 Instruction Manual

4 Configuration

Selecting the Lens Used

After the initial installation and after replacing the lens, click [
[Devices] > [Lens] and select the lens model attached to the main capture camera. When using a lens model not included
in the list, select [Unspecified] instead.

Switching to Underslung Mode

If the camera head is installed in underslung position, set [Underslung mode] to the ON position.
When the system is set to underslung mode, the direction of pan/tilt movements is reversed.

Setting the Camera Head's Motion Range

Set the limits for the camera head's pan, tilt, roll and zoom motion.
The homing position does not change even after setting the camera head's motion range limits. As a result,

the camera head may move outside the motion limits set during the homing operation.
] (Robotic Camera Head Settings menu) > [Control] >
19
Selecting the Lens Used