Table of Contents
Advertisement
FusionDC1000B Prefabricated Modular Data Center
Quick Guide (2021, Saudi, ITC)
Figure 2-2 Cover positions
(1) Air exhaust vent cover
1.
2.
Issue 01 (2021-01-11)
Use a Phillips screwdriver to remove the screws reserved on the cover of the
connection box from the outside of the pre-fab. module.
Figure 2-3 Removing screws from the connection box cover
Cut the glue between the cover and the pre-fab. module using a utility knife.
Figure 2-4 Cutting off the glue from the connection box
Copyright © Huawei Technologies Co., Ltd.
(2) Connection box cover
2 Installation Guide
(3) Air intake vent cover
4
Advertisement
Table of Contents
