Table of Contents
Advertisement
Clean Circulation Air Filter
1. Remove the filter:
Remove screw (6) under cup holder (5) and tilt the cup
holder forward. Hold handle (7) and pull handle (7)
toward you to remove circulation air filter (8).
d
CAUTION: When using compressed air pressure, wear
safety glasses or goggles.
IMPORTANT: If compressed air delivery pressure is
high, damage to the filter fins may result. Always use
compressed air at the lower pressure than 0.2 MPa
(2kgf/cm
). Keep the nozzle away from the core surface
2
more than 500 mm.
2. Clean circulation air filter (8).
Clean circulation air filter (8) using compressed air or by
washing with water.
Washing procedure with water is as follows:
2.1 Use tap water.
2.2 Submerge the filter in water containing a neutral
detergent for about 5 minutes
2.3 Clean the filter with water again.
2.4 Sufficiently dry the filter.
IMPORTANT: Inappropriate installation of the filter may
cause dust to enter into the air conditioner, causing
malfunction or breakdown of the air conditioner.
Before installing the filter element, clean off dust
around the mounting area; install the filter element
with extra care.
3. Install the cleaned circulation air filter or a new filter by
following the filter removal procedure described in step
1 in the reverse order.
MAINTENANCE
5
7-115
6
8
M4GB-07-108
7
MNEC-07-044
Advertisement
Table of Contents
