13. One point to propeller shaft center support (19).
--- every 250 hours
14. One point to front propeller shaft universal front (20).
--- every 4000 hours
One point to front propeller shaft universal rear (22).
--- every 4000 hours
15. One point to front propeller shaft splines (21).
--- every 2000 hours
f
NOTE: When greasing spline (21), steer the machine fully to
the right or left, and stop the engine.
Lubricate the fitting, start the engine and slowly turn the
machine from side to side 2 or 3 times after greasing to
lubricate the spline enough.
IMPORTANT: When greasing with the machine positioned
in straight, remove the fitting on the sleeve yoke
before starting the engine.
MAINTENANCE
7-30
90Z7-7-24-1
90Z7-7-24-2
90Z7-7-24-3