Table of Contents
Advertisement
8. Reclining Angle Adjustment
The reclining angle can be adjusted up to 10° forward
and 34° backward by 2° intervals respectively by pulling
up reclining adjusting lever (8). After moving the seat to
the desired position, return the reclining adjusting lever
to the original position. Check that the reclining angle is
locked in the desired position.
9. Lumbar Support Adjustment
A swelling on the backrest surface can be adjusted. Turn
knob (9) until the desired swelling is obtained.
f
NOTE:
Turn the knob to adjust the swelling on the lumbar support.
The lumbar support adjusting knob works irrespective of
the turning direction.
When the knob is continuously rotated, swelling / shrinking
of the backrest is repeated.
10. Headrest
Adjust the headrest position by pulling up or pushing
down the headrest. The headrest height adjusting
stroke is 100 mm. In addition, the fore/after angle of
the headrest can be adjusted in the range of 49° on
both sides by pulling forward or pushing backward the
headrest.
When required to remove the headrest, fully pull up the
headrest.
OPERATOR'S STATION
1-124
8
M4GB-01-096
9
M4GB-01-097
10
M4GB-01-099
Advertisement
Table of Contents
