Led Board - Sony SWF-BR100 Service Manual

SWF-BR100
2-7.

LED BOARD

1 Insert the jig into the space and slowly
remove the panel (back) block.
Note 1: When using a jig, please work
so as not to injure panel (back)
block and speaker cabinet.
2 All bosses are removed while moving
jig in the direction of the arrow, and
panel (back) block is removed.
Note 2: Please spread a sheet under a unit
not to injure top panel.
10
total six bosses
– bottom view –
6 connector (CN801)
7 LED board
5 panel (back) block
2 All bosses are removed while moving
4 two screws 3 Draw out the wire from
(BVTP 2.6) hole of speaker cabinet.
1 Insert the jig into the space and slowly
remove the panel (back) block.
Note 1: When using a jig, please work
so as not to injure panel (back)
block and speaker cabinet.
jig in the direction of the arrow, and
panel (back) block is removed.