Lifting The Packed Drive Unit - Bosch Rexroth Hagglunds DUc MS2 Installation & Maintenance Manual

Transport and storage | Hägglunds DUc Drive unit

6.2 Lifting the packed Drive Unit

The packed Drive Unit is among other things marked with centre of gravity and
weight. Normally the Drive Unit package is designed for forklift handling.
Packed Drive unit can tip over
Danger to life or risk of injury, damage to equipment
▶ Centre of gravity is high, see label on the crate.
▶ Avoid rapid acceleration, deceleration and turns while moving the goods.
▶ Position the forks according to the instructions in 6.2: Lifting the packed Drive
Unit, section Lifting with fork lift
Lifting with fork lift
The lifting of drive units must be done according to Table 8. The centre of gravity
has to be between the forks.
Table 8: Minimum required fork length
Cabinet size
DUc MS2, MT2 (long side)
DUc LS2, LT2 (short side)
DUc LS3, LT3 (short side)
DUc LS3, LT3 (long side)
Parts that are delivered separately
• The package is always marked with the weight.
• Packages are only designed for forklift truck handling.
WARNING
Fork length
mm
1150
2400
2400
1500
RE 15326-WA, Version 06.2020, Bosch Rexroth AB
27/88
in
45.2
94.5
94.5
59.1