Mounting Instructions For Solar Frame - Bosch ConnectS2 User Manual

Connect S2 | Solar Frame | User Guide

Mounting instructions for Solar Frame

CAUTION
The supplied mounting material (nuts, washers, etc.) is used to correctly mount the Solar Frame
and gateway.

The flange nuts supplied are specially selected for mounting the Solar Frame and must only be
used ONCE. If the Solar Frame must be dismounted, always use new flange nuts.


The solar cells in the Solar Frame can be damaged by a fall. It is solar glass.


TIP
It is recommended that you first plug the Solar Frame connector into the gateway and tighten it before
inserting the gateway into the Solar Frame.
© Robert Bosch Manufacturing Solutions GmbH
Only use the supplied mounting material.
Only use the flange nuts supplied.
Use them only once. No multiple
Pay attention to safe handling when mounting the solar frame and avoid a fall of the Solar
Frame.
Replace a damaged Solar Frame.
use.
18 | 39
Bosch Connected Industry