Wall-Mounted Device - Siemens SIPROCESS GA700 Quick Start Manual

Installing
4.1 Safety instructions for installation
Note
The installation location should be:
● Easily accessible
● Vibration-free
● Within the ambient temperature limits
Note
Air circulation
Make sure that there is no build up of heat at the installation location. Make sure that sufficient
air circulates around the rack-mounted device.
Do not cover the ventilation slit.
If you install more than one rack-mounted device, maintain a clearance of one height unit (4.4
cm) to the next device.
4.1.2

Wall-mounted device

Protection against incorrect use of the wall-mounted device
Only use the wall-mounted device within the voltage limits specified on the nameplate.
Damage to the membrane keyboard
Make sure that the membrane keyboard is not damaged during installation of the wall-
mounted device.
Note
Do not open the wall-mounted device during operation. Only open the wall-mounted device
during installation, when connecting up or for maintenance purposes.
Note
When installing wall-mounted device make sure it weather protected. Protect the wall-mounted
device from:
● Direct thermal radiation
● Mechanical damage
● Direct sunlight
38
WARNING
CAUTION
Compact Operating Instructions, 05/2015, A5E31805656-03
Quick Start