Toshiba G7 Series Applications Workbook page 23

Introduction
The G7 will output a variety of information, for either monitoring or feedback purposes, through either
the AM or FM terminal or through one of two analog outputs available on an option card. The table
below shows the drive parameters that can be monitored through the analog output terminals.
Post Compensation Frequency
For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192
efesotomasyon.com -Toshiba inverter,drive,servo,plc
Configuring Analog Outputs
Output
Output Frequency
Frequency Reference
Output Current
DC Bus Voltage
Output Voltage
Speed Feedback (real time)
Speed Feedback (1 sec filter)
Torque
Torque Command
Internal Torque Base
Torque Current
Excitation Current
PID Feedback Value
Motor Overload Ratio
ASD Overload Ratio
PBR Overload Value
PBR Load Ratio
Input Power
Output Power
Peak Output Current
Peak DC Bus Voltage
PG Counter
Position Pulse
RR Input
VI/II Input
RX2 Input
FM Output
AM Output
Meter Adjust Value
Measured in
Hz
Hz
% of maximum Amps
% of maximum Volts
% of maximum Volts
Hz
-
-
% Torque
% Torque
-
% of maximum Amps
% of maximum Amps
-
%
%
%
%
kW
kW
% of maximum Amps
% of maximum Volts
-
-
% of maximum input
% of maximum input
% of maximum input
% of maximum output
% of maximum output
-
6
23