D-Link DAP-1620 User Manual page 96

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
Figure 72. The window for changing the settings of the extender's port.
In the opened window, specify the needed parameters:
Parameter
Speed
Data transfer mode.
Select the Auto value to enable autonegotiation.
selected, the Autonegotiation Modes and Flow сontrol sections
are displayed.
Select the 10M-Half, 10M-Full, 100M-Half, or 100M-Full value
to manually configure speed and duplex mode for the port:
10M-Half: Data transfer in just
•
can be either sent or
of up to 10Mbps.
10M-Full: Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
100M-Half: Data transfer in just
•
can be either sent or
of up to 100Mbps.
100M-Full:
Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
Page 96 of 125
Configuring via Web-based Interface
Description
one direction at a time
received) at the maximum possible
rate of up to 10Mbps.
one direction at a time
received) at the maximum possible
rate of up to 100Mbps.
When this value is
(data
rate
at the
(data
rate
at the