D-Link DAP-1620 User Manual page 11

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual
LED
The Wi-Fi Signal Strength LED is a LED scale. It shows the signal strength of the wireless
network to which DAP-1620 is connected. The more LEDs are on, the better the signal strength is.
To improve the signal strength, move the extender closer to the source of the signal.
In case the POWER/WPS LED is solid red, one of the Wi-Fi Signal Strength LEDs is solid red
and the other two are blinking green, the device is in the emergency mode. Restore the factory
default settings via the hardware RESET button.
WPS button is located on the front panel of the extender.
Button
WPS
Mode
Solid green
No light
A button to set up a wireless connection (the WPS function).
To use the WPS function: with the device turned on, push the button,
hold it for 2 seconds, and release. The POWER/WPS LED should
start blinking.
Page 11 of 125
Description
Excellent signal strength.
The device is not configured as a Wi-Fi client
or the device's WLAN is off.
Description
Overview