Dns - D-Link DAP-1620 User Manual

DAP-1620 AC1300 MU-MIMO Wi-Fi Range Extender
User Manual

DNS

On the Advanced / DNS page, you can add
DNS servers are used to determine the IP address from the name of a server in Intranets or the
Internet (as a rule, they are specified by an ISP or assigned by a network administrator).
You can specify the addresses of DNS servers manually on this page or configure the extender to
obtain DNS servers addresses automatically from your ISP upon installing a connection.
! When you use the built-in DHCP server, the network parameters (including DNS servers)
are distributed to clients automatically.
Specify needed settings for IPv4 in the Name Servers IPv4 section and for IPv6 in the Name
Servers IPv6 section.
To remove a DNS server from the page, click the Delete icon ( ) in the line of the address.
When all needed settings are configured, click the APPLY button.
10 Correct operation of the page will be implemented in the next firmware version.
10 DNS servers to be used by the LAN clients.
Figure 70. The Advanced / DNS page.
Page 94 of 125
Configuring via Web-based Interface