UPS2000-G-(1 kVA-3 kVA) Battery Pack
Quick Installation Guide (2016, Russia)
3.1 Unpacking and Checking
After a battery pack is delivered onsite, unpack it and check as follows:
3.2 Preparations
Get installation tools insulated to prevent electric shocks.
Table 3-1 Tools
Appearance, Specifications, and Name
Multimeter
Issue 02 (2016-07-28)
3
If any damage is found on the battery pack appearance, contact the carrier immediately.
Check that battery pack bar code (on the rear of the pack, near the wiring port) is
consistent with that specified in the order. If any discrepancy is found, contact local
Huawei office immediately.
Do not transport the battery pack by holding the mounting ears, front panel, or protective
cover.
Remove rings, watches, and other metal objects before you move the battery pack.
Phillips screwdriver
(PH2 x 150 mm,
PH3 x 250 mm)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Installing the Battery Pack
Flat-head
screwdriver (2 mm x
80 mm)
3 Installing the Battery Pack
Torque screwdriver
7