Huawei ECC500 User Manual page 70

ECC500
User Manual
Context


Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose Monitoring > MUC01A1 > Running Parameter > Short Message Settings.
Step 3 Set Short Message Language, Phone Number 1, and Level of Short Message Notified 1,
as shown in
Figure 5-18 Setting SMS parameters
Table 5-4 SMS parameters
Parameter
Short Message
Language
Phone Number
Level of Short
Message Notified
Step 4 Click Submit.
----End
Issue 03 (2020-01-06)
After SMS parameters are set, if an alarm is reported, the ECC500 will send a
notification short message based on the parameter settings to the specified mobile phone
number.
Take the MUC01A expansion card settings for example, if connect to MUC02A
expansion card, replace the MUC01A1 to MUC02A1.
Figure 5-18. Table 5-4
Setting
Select English or Chinese.
Enter an engineer's mobile phone number. After an alarm is
generated, the ECC500 will send a notification short message to
the phone number.
Select an SMS notification level. If Warning is select, then all
alarms at the Warning level or higher will be sent to the phone
number specified in Phone Number through SMS.
Copyright © Huawei Technologies Co., Ltd.
describes the parameter settings.
5 UI Description
63