Setting Sms Parameters - Huawei ECC500 User Manual

ECC500
User Manual
Procedure
Step 1 Log in to the ECC500 WebUI.
Step 2 Choose Monitoring > System Equipment > Running Parameter.
Step 3 Set Online Check Enable to Enable.
Step 4 Click Submit.
Step 5 Set Device Address and Device Name.
Set Device Address and Device Name to the IP address and name of the networked device
respectively, for example, 192.168.2.137 and No. X ATM at XXX site, as shown in
5-17.
Figure 5-17 Adding a networked device
Step 6 Click Submit.
----End

5.2.6 Setting SMS Parameters

Prerequisites



Issue 03 (2020-01-06)
SIM card has been installed on the GPRS expansion card.
You have obtained the ECC500 IP address as well as the user name and password for
WebUI login.
You have prepared a PC which is in the same IP address segment as the ECC500 and
connected the PC to the ECC500 over a switch.
Copyright © Huawei Technologies Co., Ltd.
5 UI Description
Figure
62