Changing The Focus - Acer CR-5130 User Manual

Changing the Focus

1. Set the mode dial to one of [
[ ] and power on the camera.
2. Toggle the [
The selected focus mode is displayed on the LCD monitor.
[no indication]: Normal Auto Focus (0.8m to infinity).
[ ]: Macro Auto Focus (0.09m to infinity/
Wide, 0.3m to infinity/Tele).
[ ]: The camera will focus on the subjects
in a distance of infinity to take photos.
[3m]: The camera will focus on subjects
in a distance of 3m to take photos.
[1m]: The camera will focus on subjects in
a distance of 1m to take photos.
3. Compose the picture.
4. Press the shutter down halfway, then press it down fully.
Note:
When shooting a close-up in Macro mode, use the LCD monitor to compose your shot,
avoiding the off-center parallax phenomenon.
There is not a distinct point (subject range) at which Normal mode is favored over Macro
mode; take in image in both optical modes and compare the results.
After a Macro shot is taken DO NOT FORGET to reset the lens to the normal position.
], [ P], [ Tv ], [ Av ], [ M ], [
] Focus button.
], [ ], [ ] ,
29