Getting Started; Installing The Battery - Acer CR-5130 User Manual

GETTING STARTED

You can use either a Lithium Ion battery or an AC power adapter (5 V) to power on the
camera. Battery power is convenient for capturing images or video clips while an AC
adapter power is useful when transferring images to your computer.

Installing the Battery

1. Make sure the camera power is off.
2. Open the battery/SD Memory Card cover.
3. Insert the battery in the correct orientation shown.
Tilt the battery lock lever toward the strap
attachment and then insert the battery following
the orientation of the arrow on the battery's
label.
Insert the battery as far as it can go.
4. Close the battery/SD Memory Card cover.
To remove the battery:
Open the battery/SD Memory Card cover and then release the battery lock
lever. After the battery is slightly ejected, pull out the battery slowly.
Note:
Use only the specified battery type (Lithium Ion).
If you are not going to use the battery for an extended period of time, remove it from the
camera to prevent leakage or corrosion.
Avoid using battery in extremely cold environments as low temperatures can shorten
the battery life and reduce the camera performance.
If you open the battery cover without removing the battery, the power will not be quit. If you
remove the battery, you have to insert the battery again in a period of 2 hours in order to
make sure that the date and time will not be reset.
17